universal ac input built-in active pfc function, pf >0.94 protections: short circuit /overload/over voltage fixed switching frequency at 100khz forced air cooling by built-in dc fan model number output volts output amps ripple & noise load reg volt tolerance min load triple output TP150-a 5 volts(dc) 15 amps 100mvpk-pk 3.0% 3.0% 2.0~20amps 12 volts(dc) 6.0 amps 120mvpk-pk 6.0% 8.0% 0.4~7.0amps -5 volts(dc) 0.6 amps 100mvpk-pk 4.0% 6.0% 0~1.0amps TP150-b 5 volts(dc) 15 amps 100mvpk-pk 3.0% 3.0% 2.0~20amps 12 volts(dc) 5.5 amps 120mvpk-pk 6.0% 8.0% 0.4~7.0amps -12 volts(dc) 0.6 amps 100mvpk-pk 4.0% 6.0% 0~1.0amps TP150-c 5 volts(dc) 15 amps 100mvpk-pk 3.0% 3.0% 2.0~20amps 15 volts(dc) 4.5 amps 150mvpk-pk 6.0% +10,-6% 0.4~6.0amps -15 volts(dc) 0.6amps 100mvpk-pk 4.0% 6.0% 0~1.0amps TP150-d 5 volts(dc) 15 amps 100mvpk-pk 3.0% 3.0% 2.0~20amps 24 volts(dc) 3.0 amps 150mvpk-pk 6.0% 8.0% 0.4~4.0amps 12 volts(dc) 0.6 amps 100mvpk-pk 4.0% 6.0% 0~1.0amps 150w triple output with pfc function TP150 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range (note 3) 90-264vac / 127-370 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 40amps @ 230vac input current 2.5 amps max @ 115vac 1.2 amps max @ 230vac leakage current < 3.5ma / 240 vac power factor @ fl pf > 0.94/230vac >0.98/115vac output specifications voltage and current see selection chart line regulation 1.0% load regulation see selection chart voltage tolerance (note 2) see selection chart ripple/noise (note 1) see selection chart hold up time @ fl 24ms/230vac, 24ms/115vac setup, rise time @ fl 800ms, 60ms/230vac 800ms, 60ms/115vac over voltage protection 5volts(dc) only: 5.75~6.75volts(dc) shutdown o/p voltage, auto recover over current protection 105~150% rated ourtput power hiccup mode, auto recover over temperature protecion 95c 5c (tsw1) shutdown o/p voltage, auto recover dc voltage adjust 5volts(dc): 4.5~5.5volts(dc) general specifications safety ul60950-1 tuv en60950-1 approved insulation resistance 100m? / 500volts(dc) emi compliance to en55022 (cispr22) class b harmonic current compliance to en61000-3-2,-3 effciency 77% typ. isolation 3000vac input - output 1500vac input - ground 500vac output - ground 1min ems compliance to en61000-4-2,3,4,5,6,8,11; env50204, en55024 light industry level, criteria a environmental specifications oper. temperature -10c to +60c (see derate curve) storage temperature -20c to +85c, 10~95% rh relative humidity 20 to +90% rh non cond temperature coeffcient 0.03% / c (0-50c) mtbf 161.6khrs min, mil-hdbk-217f (25c) vibration 10~500hz, 2g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 199 x 99 x 50 inches 7.84 x 3.90 x 1.97 weight 31.75 oz (900g) note 1. ripple and noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor. 2. tolerance: includes set up tolerance, line regulation and load regula - tion. 3. derating may be needed under low input voltages. please check the derating curve for more details. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 150w triple output with pfc function TP150 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
150w triple output with pfc function TP150 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
150w triple output with pfc function TP150 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
